Testors新酷炫油漆瓶托盘

Testors Paint Bottle Tray New Awesome!

2024-04-08 13:54:30

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Hello and thanks for visiting my project. I was looking for a nice simple but cool looking tray for all my Testors Paint bottles and although there are many out here and there, I wanted something different. And I thought, what if I made a cool new design, which the bottles fit perfectly in the trays, I wanted to be able to see the colors, not just the tops in a flat rack!

So I started working on this one piece. At first I rounded off the ends on the sides as I did on all edges, but then I thought... What if I make it Modular! So I left the sides with square edges, added locking tabs on the bottom sides, and this way I can make multiple ones of these, lock them together, maybe add more different pieces!
So I am now working on a corner piece for glues, paint brushes, pens, markers, X-Acto knifes etc.! Also a shorter center section that has 3 lower bottle holes and a soda can holder behind, got to have that Pepsi while building models!! LOL
Other in the works too!
I included a picture of the Corner Tray I'm working on attached to 2 of these straight trays, one on each side for you to see.

Well I hope you guys like this one, my first piece on here, and give me some good comments and share! If you have ideas on pieces to add, please comment them so I can try and make more pieces to make this a super useful modular paint tray system!

Print Settings

Printer brand:
Creality
Printer:
Ender-3 Max
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
10% Gyroid
Filament brand:
Anycubic and others
Filament material:
PLA
Notes:
This is a fairly big flat bottom, so I start my first 10 layers slow, 20mm/s

Note the bottom settings for best results!
I have great results with multiple prints with these settings, mostly the slower layers on large flat bottom prints (no curling, shrinking or lifting)

Using standard 0.4 nozzle

Walls:
1.2 (3 Walls)
Select "Outside to Inside"
Z Seam Alignment: Random (Or anything you prefer)

On the "Top/Bottom" Settings:
1.2 (6 Layers)
Top/Bottom Pattern: Select "Lines"
Bottom Pattern Initial Layer: Select "Concentric"
Check for "Connect Top/Bottom Polygons" use it!

Printing Temperature: 215
Printing Temperature Initial Layer: 220

Build Plate Temperature: 60
Build Plate Temperature Initial Layer: 65

Speed: 60mm/s
Initial Layer Print: 20mm/s
Number of Slower Layers: 10

Infill: 7% to 10% Gyroid (I like the Gyroid, but you can use what you like)

Use Skirt 3 line count

Have fun and great prints! Post your prints!
Thank you!