Logos房子奖杯
Logos house trophy
2024-04-08 16:06:44
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This can be a tough print for most printers due to the large over hanging sections so I highly recommend using supports. I've included space in the bottom portion of the base for an Arduino to control the lights. If you are looking to turn this into an infinity cube and aren't sure where to start there is a very useful guide here: https://www.instructables.com/Easy-Infinity-Cube/
Print Settings
- Printer brand:
Bambulabs
- Printer:
Bambu X1
- Supports:Yes
- Resolution:.4mm
- Infill:15%
- Filament brand:
Inland
- Filament color:
Silk Silver
- Filament material:
PLA
- Notes:
Listed as X-1 bambu printer, the actual printer used is the A-1
Post-Printing
Tags
License
CC BY-NC
Logos house trophy
by TheKeyforgeTrophyGuy is licensed under the Creative Commons - Attribution - Non-Commercial license.
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
猜你喜欢
联系我们
邮箱: 289047960@qq.com
热门推荐
-
三维打印可全制作转盘2023-03-26 -
Gaggia Classic Pro Feet 25mm2023-03-27 -
The Joker 基底 92024-01-03 -
三脚架快速下放板2024-03-28 -
克利普施 Promedia 2.1音量Pod模拟机器架（铝制支架）安装基座2024-04-29
最热下载
-
Fillenium Malcon 3D模型打印解决方案，星球大战飞船2023-03-26 -
3D模型：Easier Print LTT螺丝刀拉拔器2024-01-14 -
生态FLOW EcoFlow Wave 2风扇系列,EcoFlow Wave 2通风口2024-02-05 -
7英寸HDMI显示器-B外壳2024-04-01 -
Enders 3版控制面板2024-05-08
最新模型
-
3D模型：Barlgura2024-05-08 -
Nemesis（附带余波）装备卡组2024-05-08 -
极简家具把手2024-05-06 -
Base Jigkick v2 for psp Baryon Sweeper2024-05-06 -
垃圾桶固定扣2024-05-06