拉皮伦 190cm x 98cm x 52cm 模块化箱体

Rasperry Pi Modular Enclosure 190x98x52

2024-04-08 21:14:20

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This a part of a series of modular enclosures for raspberry pi or micro-computer projects. The aim being to provide a flexible and adaptable way of mounting components within the enclosure. It is also part of the aim for the enclosures to flexibly mount with each other to provide further ways of adding components and sensors.

The outer case is 190x98x52mm

The internal cage is 152x68x33mm.

Plastic M4 and/or M6 bolts, or similar are recommended for assembly. They will also be required or another improvised means of holding the internal cage in place.

This design has not, so far, been 3D printed hence it is marked as a thing in progress. An earlier variant was successfully 3D printed and assembled.

If nothing else it could be scenery for table top gaming :).

Print Settings

Printer:
I do not own a printer
Notes:
I have not 3D printed this particular design but have had an earlier variant successfully 3D printed and assembled. Constructive feedback at this stage would be welcome.

Custom Section

This inspiration for this project was sawing up plastic kitchen food containers in order to make a modular enclosure mounting system for a raspberry pi project. The amount of time this took led to try and create and adaptable modular design enclosure system for prototyping and design.