流氓拉皮螺-RLS1

Rogue Lap Steel Nut - RLS1

2024-05-05 02:03:36

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Replacement nut for the Rogue RLS1 Lap Steel guitar. This is a direct replacement using the same screw holes, although I would recommend a longer and larger screw. It will work with the existing hardware but has been designed to accommodate a #5 wood screw with a pan
head. The string spacing on these is 3/8" which makes the nut slightly wider than the original. This will give you a little more room for playing single notes with the bar and behind the bar bends. I printed these solid, the original nut is hollow. I have included 2 versions designed to keep the tops of the strings flat with the different string gauges required for C6 and Open G tuning. The Open G will probably work for Open D and E as well. Printed with 100% infill I found an improvement in sound as compared to the original hollow nut. I would recommend printing in a harder material, PLA seems to work fine but I would think PETG would be too soft. I recommend a brim to keep the corners from lifting during print; I use 8mm.

Print Settings

Printer brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
.12
Infill:
100%
Filament brand:
Hatchbox
Filament color:
Black
Filament material:
PLA
Notes:
I would recommend printing in a harder material, PLA seems to work fine but I would think PETG would be too soft. I recommend a brim to keep the corners from lifting during print; I use 8mm.