星际迷航队企业号光束器（改版）+能量单元

Star Trek Enterprise Phaser Tweaked + Power Cell

2024-04-09 05:14:49

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Combined multiple parts to have a better resulting print. Specifically the top, back, and muzzle pieces. Modified the top piece to have more space for the body to fit in as well as more space for the emitters to fit in the front of it. I also modified the top so it will use a ball joint-type hinge to the body instead of using a hole for filament/metal piece for the hinge - I have not tested this yet. If it doesn't work I can upload one with a hole in it to match the previous design. Also added a power cell model and associated coil (for printing different colors).

Note: Scale z-axis (untick maintain proportions) for the grip strap pieces to 12 - 12.5mm range; the original part was too tall for me. Didn't mind it enough to want to rework it, but may if there is interest.

Orientation: You will want to use the Auto-Orientation extension in cura for best results. For the top piece you will want the long flat vertical side to be 90deg relative to the print bed for best results (in my experience).

Everything should use supports (I had good results with tree supports). Power cell coil seems like it will print better vertically on highest resolution with rafts on and using normal supports - need to verify.