恩德 3 S1 床架导线支撑结构

Ender 3 S1 Bed Wire Support

2024-04-09 05:58:18

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is still imperfect, though it does work as desired.

I created this out of a desire to replace the bulky wire support that came with my Ender 3 S1 as it made bed leveling difficult while keeping the other springs tight.

This is lower profile, making keeping tension on all of the bed springs easier. It includes a pass through for a zip tie as well as supports that extend slightly to the bed, preventing the sag that often comes with slim versions of this part.

I printed this in ABS as it is stronger has a higher heat tolerance than PLA.

Note: I use a glass build plate, so the height of the bed support is based on that. Changes will need to be made to support the standard build plate. If you send me the thickness of the bed with the build plate, I can add a model for that as well.

Print Settings

Printer brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2mm
Infill:
70 - Lines
Filament brand:
Creality
Filament material:
ABS
Notes:
The only part that should need support are the extrusions that will support the part on the bed. I opted for tree support because that allowed them to be supported by the bed rather than the part below it.