大型TPU模具，适用于5/8英寸

Big jam plug for 5/8" TPU

2024-04-10 17:31:35

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Size - Height: 20mm(without thread), Diameter: 40mm, Stem(thread) height: 16mm

This model is kind of in between a toe stop and a jam plug.It makes certain moves like the compass easier, while it's still not interfering with dribbles.

For smooth finish print with the head upside and change support overhang angle to more than 65 degrees so it wont mess with the threads and would supports only the plug's head like shown in the screenshot.

Also use brim for bed adhesion.

If you are using harder TPU you can play with infill with Cross 3D pattern to make it squishier. But mind that you may need to adjust the number of walls and top layers, so it would be more durable.

If you don't care for imperfections you can also print the plug with the head at the bottom, you will need less support that way.

If you plan to use the plug for stopping and etc. I would recommend to print it solid with say 1000 walls.