电容器持有器（适用于Leijang YJ-T110八刀切割机）

Capacitor Holder for Leijang YJ-T110 Octo-Cutter

2024-04-10 17:32:59

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a a custom capacitor cover for the LeiJang YJ-110T or T110 Octo0Cutter/ cloth cutter that allows the weird custom start/ run capacitor (Part 39 in drawing) to be replaced with more standard start/run capacitor of the same rating (e.g. https://www.amazon.com.au/dp/B0CR179CC6) 6uF 450V AC 50/60HZ with 2Pins 48x20x33mm

The original capacitor has been the first part to fail on several of these for me, this is a cheap & easy life extension. Just cut away the old cap, solder a new one on (doesn't matter which way around it goes) and use this cover & the existing screws to retain the new cap in place & keep the wires where you reconnected it safely out of the way.

When the old caps failed the cutter just stopped working, there was a bit of a humming noise when you switched it on. The old caps had bulged visibly.

https://drive.google.com/file/d/1v8BBop05rsAMQG718IOig7Wt19MeCfD5/view?usp=sharing is a STEP file if you want to change it.

https://www.lejiang.com/en/content/?1038.html shows the item this works for.

Print Settings

Printer brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2mm
Infill:
30%
Filament brand:
Sunlu
Filament color:
black
Filament material:
PLA+
Notes:
print settings not crucial. Tree support and the orientation in pic worked well.