摄像机操作眼镜架

Camera Operator Glasses Dock

2024-04-10 17:33:22

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

If you're like me, a working film professional and/or a camera operator who wears glasses on set, you know how annoying it is to try and use an eyepiece while wearing glasses.

This helps to have a place to hang them up while using an EVF on dolly/ sticks/ or even as a focus puller at his station etc.

*Initially printed in PETG however TPU 95A has been my favorite material so far.

Print Settings

Printer brand:
Bambulabs
Printer:
Bambu P1P
Rafts:
No
Supports:
No
Resolution:
.08
Infill:
20%
Filament brand:
Polylite
Filament material:
PETG
Notes:
Has both 3/8-16 & 1/4-20 printable screws, both of which are pretty spot on for the existing industry standards. I recommend printing at least the screws at the highest resolution your printer can handle as the threads won't print well at a standard 0.2 layer height. I had good results at 0.08 layer height. Cheers.

*Bonus tip: If you and your printer can manage it, try this design out printed in TPU! I tried it on 95A softness black TPU and it came out fantastic, its less abrasive to the frame of your glasses as something solid like PETG and its also a little indestructible if bumped into. IF ATTEMPTING TPU PRINT, print it very slow, like 10-15mm/s slow. The overhangs printed great after I adjusted this.