热门泰克 Core V21 足部3D模型
Thermaltake Core V21 Foot
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I had a couple of feet break on my Thermaltake Core V21 computer case and moved at the same time. Figured why not print feet with additional space between the floor and bottom of the case. Originally, I had just used the same connection type, but these break easily, so I decided to create a foot with a thread and just bolt it to the case.
Foot provides ~60mm of clearance between PC and floor. Threading used is M20x1.75
Printed with super quality default settings on Cura. Ender 3 Pro stock with CRTouch.
*Disclaimer: These have not been stress tested and may not hold up the same as the original feet supplied by Thermaltake.
Tags
License
Thermaltake Core V21 Foot
by eablake153 is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
猜你喜欢
联系我们
热门推荐
-
蓝色带刺贝壳3D模型模板2023-05-22 -
地球宫2024-04-24 -
2005-2009款福特野马S197倒车摄像头支架3D模型2024-04-28 -
小米智能手环8Pro充电座2024-04-29 -
BHI改进型战车模型2024-04-30
最热下载
-
SpaceX星舰S20/B4 3D模型2025-07-15 -
开源 1:10 四驱竞技型 RC 车2025-07-08 -
远投笼2024-04-06 -
BlueSCSI v2 SPARCstation驱动器支架及密封环2024-04-14 -
法兰尺寸测量工具（小）2025-07-16
最新模型
-
Flick 19E（增强型） - 可使用的玩具枪 - 类似弹弓的橡皮筋枪2025-08-21 -
SSR 衬套盖2024-05-08 -
魔术子弹搅拌机 (MBR-1101) - 电机安装底座齿轮更换2024-05-08 -
Grogu Baby Yoda 曲奇造型模具 + 附带曼多人形曲奇模具及配方！2024-05-08 -
钨皮艇密封环2024-05-06