罗克泰克易准入4布局模板

Roxtec EZENTRY 4 Layout Template

2024-05-01 22:41:34

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a layout template for Roxtec EZENTRY 4 electrical panel bulkheads.
I had a recent project that involved cutting openings in a bunch of electrical panels and got tired of laying them out by hand. This was my solution! There are cavities for 12mm x 3mm round magnets, with a pilot hole for an M3 x 4mm flathead screw (pre-threading is recommended), under the faux bolt heads. The magnets are not strictly necessary, but they do make positioning a lot easier!

Check out one of my other designs, "Bolt Head Fridge Magnet", based on the original magnet stanchions for this project.

Please Comment, or post a Make or a Re-make! Thanks!

Print Settings

Printer brand:
Creality
Printer:
Ender-3 V3 SE
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
.2
Infill:
30%
Filament brand:
SunLu
Filament color:
Black, Copper, Silver
Filament material:
PLA

Post-Printing

Markings and Bolt Heads

To get the raised copper markings and silver bolt heads required two filament changes. I started with Black Silk, which I swapped for Copper Silk at layer 9 (assuming a .2mm layer height), then switched to Silver Silk at layer 11.