适用于150mm mini线轴的纸板适配器（250g，兼容Eryone和其他品牌）

Cardboard spool adapter for mini spools 150mm, 250g (Eryone and others)

2024-04-10 17:34:42

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

适用于150mm mini线轴的纸板适配器（250g，兼容Eryone和其他品牌）

Summary

This is a remix of a model from printables.com

https://www.printables.com/model/251028-cardboard-spool-ring-for-bambu-lab-ams-parametric

This model has been edited to fit small mini cardboard spools. Like the Eryone 250g rolls and other brands. So far all of the mini cardboard spools I have encountered have all been the same outer diameter but I can't guarantee this so check your specific spool,. Cardboard spools don't like to roll well on bottom rollers.

*I am relatively new to designing and I was unable to figure out how to keep the outer side of this ring from partially blocking the filament holes without making the design rather weak. However, you can still access the holes but they are just smaller, which actually might be a benefit as the filament stays in them better. Also the spool is cardboard, so you could easily make the holes larger if you wanted.

This is a thin print so make sure your bed is clean or it will pull up. Otherwise you can use a brim but I was able to print it fine without a brim.

You can resize this a bit if needed. It will upscale just fine, but if you want to shrink, I recommend keeping the Z at 100% and only shrinking the x and y axis.

适用于150mm mini线轴的纸板适配器（250g，兼容Eryone和其他品牌）

朋友，你觉得上面这个模型，属于下面的哪个分类？