40毫米风扇蜂窝状网格烤架
40mm fan honeycomb mesh grill
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
The mesh lines are .4mm across. Your slicer will normally make the lines slightly thicker for the first layer (ie. 0.44mm, assuming a .4mm nozzle, which you should be using for this print).
If you are having any trouble with 1st layer adhesion this print will get messed up.
Make sure your Z-offset is low enough (not more than about .15mm). Apply your preferred adhesive.
You'll also want to print this slowly. I printed the 1st layer at 10mm/s, outer perimeters @ 25mm/s, and inner at 20mm/s.
Print Settings
- Printer brand:
Creality
- Printer:
Ender-3 Max
- Rafts:No
- Supports:No
- Resolution:.4
- Infill:50%
- Filament brand:
n/a
- Filament color:
n/a
- Filament material:
PLA Pro
Tags
License
40mm fan honeycomb mesh grill
by Molten_Plastic_Syracuse is licensed under the Creative Commons - Public Domain Dedication license.
相关内容
联系我们
热门推荐
-
几何跑步符号第9号2023-05-02 -
原子心双胞胎模型模板2024-01-15 -
以x轴为中心的David Orlo嵌入式轨道变体2024-03-28 -
Nintendo DS外壳装饰2024-04-04 -
Cable clip clamp R-type2024-04-28
最热下载
-
Tigersclaw《星际公民》2023-03-26 -
远投笼2024-04-06 -
克利普施 Promedia 2.1音量Pod模拟机器架（铝制支架）安装基座2024-04-29 -
比基尼模型2025-07-16
最新模型
-
Taco Bell国际象棋套装：骑士版本2024-05-08 -
Amphenol MC3M 适用于经典版舒尔话筒2024-05-08 -
Bad Batch技术头盔2024-05-06 -
18650充电宝模型2024-05-06 -
几何球体2024-05-06