墨西哥卷饼模具

Burrito mold

2024-04-11 09:42:04

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

NOTICE: I recommend only making this with PLA filament, as I don't know the toxicity of other materials, especially printing resins.

I designed this to wrap a well filled burrito in a large flower tortilla and make the edges stick together so the contents don't fall out.

To use: Moisten both surfaces of a warm tortilla and place it in slightly folded form (to make a depression) into the mold. Fill the tortilla with warm filling and fully fold to enclose the filling. Wile carefully holding the edges, turn it over in the mold so all edges are inside the mold. Gently press it down into the mold to make all the moistened edges of the tortilla come together and wait a few minutes.