石拱桥 HO 和 N 标度模型

STONE ARCH BRIDGE HO and N SCALE

2024-04-11 09:42:52

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This STONE ARCH BRIDGE in HO and N scale is intended to be a combination of 3D printing and scratch building. First determine the length and width of the bridge deck. Whether it is intended for pedestrian, automobile or railroad traffic. This overlapping modular design has no seams to finish and is intended to be very conservative with the amount of filament used and the necessary printing time required. Many structures on model train layouts are only seen from the front which allows us to only have to finish half of the model. Construct the deck out of sheet styrene, 3 ply birch plywood or any other suitable material. Add the supports to make a strong base for any railroad traffic. Once this part has been constructed then attach the side stone modules. Paint and weather.