星舰LED暗光灯

Starship LED glow in the dark lamp

2024-04-11 09:44:12

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Starship LED glow in the dark lamp. Is a replica from the reservoir and tube disposition of SN8 and mix with one of the renders of the future starship. Reason to not update to the new reservoir disposition is that looks cooler this way

Dimensions:
Height: 52cm - divided in 3 sections so it can be printed in almost any printer
Diameter: 9 cm not including the extra length of the canards.

LEDs can be installed on the inner tube and a back access panel has been added to allow operation of the LED controller.

There are spot faces for 5mm magnets but i don't use them since the fit is very good and does not require it

Please in case you want to use it for commercial purposes contact me.

Print Settings

Printer brand:
Bambulabs
Printer:
Bambu X1C
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
depends on part
Filament brand:
Smartill
Filament color:
black, glow in the dark and silver
Filament material:
PLA
Notes:
Printed with a 0.4mm nozzle and 0.2mm layer height using PLA. Some of the files require supports.

It's designed to use glow in the dark filament which require thick walls and 100% infill. Please be aware that the glow in the dark PLA might damage your nozzle in the long term.

For the canards only the LH models have been uploaded, just do symmetry to them. For the covers of the canards print them in a 60-70 degrees to minimize the support required but allowing good detail print of the shields.

File name states if supports are required, the color, the material and the infill for the glow in the dark. For the cannards is also recommended to use 100% infill