替换适用于BMW 2.5系列90度水密连接器的终端壳

Replacement Terminal Shell for BMW 2.5 90° Watertight Connectors

2024-04-11 13:46:04

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a similar idea to codeThatThinks Replacement Terminal Shell for BMW 2.5 Watertight Connectors but for the 90° connectors

Repair those old connectors commonly found on BMW E30, E36, and E46 vehicles with loose terminals. The rubber overmolding on the terminals tends to disintegrate which can cause them to fall out of the housing or not make a good connection.

This replacement terminal shell is designed as two pieces and fits tightly over the terminal after the old overmolding is stripped off. Apply a small amount of silicone RTV to the terminal first to glue the shell in place and make the connection waterproof.

Print both pieces vertically to ensure that they are perfectly circular.