PHIL - 导线持有者

PHIL - The Filament Holder

2023-03-26 19:51:56

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

PHIL 是我完全可打印的通用丝带夹持器。PHIL 知道如何持有丝带，因为 PHIL 本身就是由丝带制成的。

我在上传中包含了一些设计草图。我在 Thingiverse 上搜索了设计灵感，并考虑使用 OpenSCAD 对一些现有的设计进行定制化处理。但最终我决定制作一个独特且 100% 可打印的作品。

I've tested the spool holder with Makerbot ABS, small PLA, large PLA, and various other generic spools. By spreading out or rotating your two PHILs you should be able to accommodate any size spool.

I put some stick on rubber feet on my PHILs because I have a slippery desk. You can also use 3M Command Strips to hold PHIL down if necessary. Lastly, I've included mounting holes for screws on the bottom of PHIL if you'd like a slightly more permanent installation.

Thanks to TBuser for the great pin library I used to make PHIL spin.

Update 9/20/15: I've added the source Trimble SketchUp file for those users with print tolerance issues. Hopefully scaling the spools slightly larger or smaller should help with tightness/looseness issues.

My spools printed on the tight side, but the longer I spun them the easier they turned. Now they spin like matchbox car wheels!