Saphe Drive Pro 太阳镜适配器

Saphe Drive Pro Adapter for Sunvisor

2024-04-11 16:10:00

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Hello,

the task was to make a adapter/ holder/ clip for the Saphe Drive Pro. Usage of the sticky pads that came in the box, is no option, since my car should stay clear of any glued holder solution.

On thingiverse, there is a handful of adapters for the Saphe Drive Pro, however only angled versions of the type that came in the box.
There are sun visor solutions for other things like garage door remotes, etc.

However, on amazon, ebay actually are some sun visor clips available for the mentioned device, however they're ridiculously expensive and are just "slide over" type of holders.

The design that is proposed here, uses the original adapter-plate holes and imitates the adapter-plate that came in the box.

A small design should do it.

I designed it to be asymmetrical, since it can be printed sideways in just one piece with a reduced amount of supports, where the snap-in noses are placed.

Happy printing.
Hannes

Print Settings

Printer brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
Yes
Resolution:
0.15
Infill:
15%
Filament brand:
3dJake
Filament material:
PETG
Notes:
Make use of supports for the snap-in noses

Use support-blockers, where needed.

I used a 3 perimeter wall size.