风之森手摇饰

Windy forest fidget

2024-04-12 02:46:33

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Turn the gear and see the trees bend in the wind.

When you turn the gear the trees will turn and it looks like they bend in the wind. The internal gears make this happen.

Some glue work is needed after the print. You find detailed instructions below.

Enjoy printing this object.

Print Settings

Printer brand:
Flsun
Printer:
Flsun V400
Rafts:
No
Supports:
No
Resolution:
0.2 mm layer heigth
Infill:
20 %
Filament brand:
Eryone, Giantarm, Tinmorry
Filament color:
Green, Light grey, Black, brown
Filament material:
PLA
Notes:
Everything should print fine without problems.

Post-Printing

Windy forest fidget assemply part 1

Take the lower case and insert the gears. The large gear fits into the largest space with the opening. The two other gears fit into the other spaces. Arrange the gears as shown on the picture.

Windy forest fidget assemply part 2

Grab the upper part of the case and carefully place it on the lower part. The insets and holes make sure that you cannot do wrong. It may take some time to find the right position for the gears to fit through the holes. Hold the case together and make some test turns at the power gear to test that everything turns smoothly.