Doom Keycard显示ID位置

Doom Keycard with spot for ID to show

2024-04-12 03:42:43

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a remix of the Doom Eternal Keycard that I edited to show an ID on the back of the keycard so when you flip it around, it shows what ID you have put in there. I'll leave some dimensions down below for what size ID fits in there.

W: 2.995" or 76.082mm
H: 5.881" or 149.398mm
D: 0.159" or 4.051mm
(This is about the size of a standard US driver's license; the depth is just the space in-between the top and bottom parts. In other words, the depth of the middle part.)

I also posted an image on what I think the Doom Slayer's ID would look like. If Thingiverse doesn't let you download the image, I'll post a link down below where you can download the image so you can use it for your Doom Slayer Cosplay, or you can design your own. I used Paint 3D to make it, but you can use whatever drawing software you desire, just as long as it fits the dimensions I listed above.

Pixel dimensions for the ID (just in case you need them):
W: 266 px
H: 419 px

Link to download the image: https://tinyurl.com/RipandTearUntilitisdone

One last thing, I would highly recommend you use something sturdy to glue the ID to, so it doesn't get bent or torn as easily, I also uploaded a 3D print file to glue the ID to. You can use it if you want to, or you can just simply cut some cardboard or a plastic lid and that would work just fine.

P.S. I'll post a video of the finished product along with the rest of my Doom Slayer cosplay on my YouTube Channel (link down below).

YT Channel link: https://www.youtube.com/channel/UC7h48ILNDVappNBEsXm76lw