隐藏秘密空间碳酸饮料罐

Secret Stash Soda Can with Hide Away Compartment (Single Color Printer)

2024-04-12 04:10:37

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Remix of Secret Stash Soda Can with Hide Away Compartment by Calsynergy

https://www.thingiverse.com/thing:6225914

All credit goes to original designer.

Spent 30 min. in tinkercad slicing this design up so the top and bottom could be printed in separate pieces for those with single color printing only. Print the two silver pieces in, um...silver, and print the rest in the color of your choice. Apply glue and use a clamp to hold them together until dry. Flip "colored top" 180 degrees to avoid needing supports.

Print Settings

Printer brand:
Creality
Printer:
Ender 3
Supports:
Yes
Resolution:
0.2
Infill:
35%
Filament brand:
IIIDMAX
Filament color:
Silver, Orange
Filament material:
PLA+
Notes:
If you flip "colored top" over to the flat side you can avoid supports on this piece. Supports needed on original middle can part.

Post-Printing

Used Super glue and clamps to glue top pieces (silver top and colored top) and bottom pieces (silver bottom and colored bottom) together. They were dry before the middle can was done printing.

Tags

can Single Color stash

隐藏秘密空间碳酸饮料罐

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

最新模型