棘轮夹头固定架

Ratchet and bit holder

2024-04-12 04:38:44

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a holder for a 1/4" hex ratchet and bits. The ratchet is one of the inconsistently-named Prestacycle ratchets with a magnetic bit holder in the handle.

It is a variation of my Skeleton PB Swiss 470 M bit holder with some improvements:

Of course, it has been changed to hold a ratchet instead of a 5mm hex wrench
The walls on the bit holding arms are thinner to make it easier to insert and remove the bits
The arms are also separated from the base so the can flex more easily
The retaining bumps from v2 have been carried over

The version pictured is the original 2x7 version and the only one that has been tested. I have not printed any of the others, but I'm confident they should work. The original isn't reflected in the Fusion 360 file since I modified it a bit since then- the ArmClearance parameter has been reduced a lot, so if you have them sticking together, increase that parameter. The model is also has a parameter, SnapGroove, where the ratchet can snap into the holder in one of the five grooves in the handle- 0 being the closest to the head and 4 being on the end. From there, the model fits in as many bits as it can, though you may need to rebuild the Extrude8 feature. Just double click it, then hit OK in the Edit Feature window.

This printed with PETG for the flexibility, and the model is designed for a 0.4mm nozzle/line width and 0.3 layer thickness, though I assume thinner should work okay too.