电缆导向装置的粘合
Stick on Cable Guides
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a simple cable guide that works perfectly for neatly running Ethernet and HDMI cables. It supports cables that are up to 6mm in diameter and it keeps each of the cables 5mm apart from one another. Just simply stick some double sided tape onto each of the ends of the bracket and then stick the bracket where ever it is needed. There are 8 different variants of the model ranging from holding 1 all the way up to 8 cables in place.
Print Settings
- Printer brand:
Prusa
- Printer:
i3 MK3
- Rafts:Doesn't Matter
- Supports:No
- Resolution:0.15mm
- Infill:10
- Filament brand:
Overture
- Filament color:
White
- Filament material:
PETG
- Notes:
supports are not necessary however rafts may be depending on how well your bed adhesion is.
Tags
License
Stick on Cable Guides
by JKAMAN280 is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
相关内容
联系我们
热门推荐
-
高普瑞奥拉凯塔3D模型2024-01-06 -
Gridfinity 花瓶款式容器2024-01-14 -
Mulita 教育机器人 2.02024-03-25 -
业余无线电爱好者 - 线绕装置 / EFHW 统计装置2024-04-10 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21
最热下载
-
苹果 HomePod mini壁挂装饰2024-03-19 -
原始控制舱2024-03-25 -
法兰尺寸测量工具（小）2025-07-16 -
花环戒指2024-05-08 -
螺旋锥形手玩具（全新）2024-05-08
最新模型
-
Ender Board 螺丝模式2024-05-08 -
偏移适配器 for BTT SKR 3 EZ on Ender 5 Plus2024-05-08 -
HO比例石墙材质2024-05-08 -
Bad Batch技术头盔2024-05-06 -
狐狸粉尘密封压机，直径36毫米2024-05-06