实验室用电缆固定装置（3D模型），尺寸6毫米
Lab Cable Holder 6mm
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This lab cable holder is available in different widths. I used to use https://www.thingiverse.com/thing:1023662, but I needed one with more rows, so I created this version from scratch. The holder can be mounted using double-sided tape or screws.
The adapter for mounting the cable holder on IKEA "Ivar" shelves, which I published earlier, also fits this version and is included here. The adapter requires M3 screws at least 16mm long and M3 nuts.
Note: The holder with 11 rows will just fit the print bed of an Ender 3. The one with 12 rows should fit if you place it diagonally.
Tags
License
Lab Cable Holder 6mm
by HackUp is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
相关内容
联系我们
热门推荐
-
围巾挂钩2023-03-26 -
Gaggenau旋钮（Drehknopf）Part 50800068052023-09-10 -
哈尔塔·时世明的刀刃（来自《鬼灭之刃》）2024-03-20 -
罗利玩具拖车侧板固定钩2024-04-08 -
FPV遥控纸飞机（机身）STL 3D模型2025-09-16
最热下载
-
车身RC 1/10 全套2023-03-26 -
螺旋齿轮玩具3D模型2023-03-26 -
通用型1/10比例底盘 - DKS基础款2023-03-26 -
Flex Dino钥匙链2023-03-26 -
HGX lite v2支架2025-07-18
最新模型
-
丰田22RE发动机Starer电机2025-08-08 -
任意立方体活动关节的一体打印外星人2025-07-19 -
龙珠孙悟空，无需支撑2025-07-19 -
模块化笔筒链2025-07-19 -
鞋带锁2025-07-17