Flipper Zero兔子实验室NRF24应用用例模型

Flipper Zero Rabbit Labs NRF24 Case

2024-04-28 15:50:44

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a basic case for the Rabbit Labs hot-swappable NRF24 module, (two row pins). It has a lip to hold the lid up, and is held closed with three M3x4mm machine screws. The small vent in the top is intended to help with cooling since the chip can get a little warm if it operates for a while, (as opposed to the CC1101 cases I've done).

This one is a little clunky, but a trio of screws in this arrangement works well to keep the case sturdy without making it too large or impacting fit.

I make these for whatever hardware I have on hand at the given moment as far as machine screws go, so I may come out with more versions to fit different hardware.

Print Settings

Printer brand:
FlashForge
Printer:
Adventurer4
Rafts:
No
Supports:
Yes
Resolution:
0.12mm
Infill:
30%-100%
Filament brand:
ESun
Filament color:
White
Filament material:
PLA
Notes:
Supports are only needed on the bottom of the case, below the loops for the machine screws. Keep the resolution fairly high so the vent prints properly. If I discover issues with that on future prints, I'll make it a little less fine.