Flipper Zero Rabbit Labs CC1101 433MHz 外壳

Flipper Zero Rabbit Labs CC1101 433MHz Case

2024-04-28 15:50:45

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Flipper Zero Rabbit Labs CC1101 433MHz 外壳

Flipper Zero Rabbit Labs CC1101 433MHz 外壳

Summary

A minimalist case for the Rabbit Labs CC1101 433MHz module for the Flipper Zero. This is designed to work with the hot-swap module they also make, so it'll accept the module version with 2-row pins.

The holes in the top are intended to fit a pair of M3x6mm machine screws, and will hold the lid tightly as long as the board is seated well. So watch out for stringing or zits that might prevent this; It's supposed to be a tight fit, and these boards vary a little bit in size.

More cases like this one for Flipper Zero modules are on the way.

Print Settings

Printer brand:
FlashForge
Printer:
Adventurer4
Rafts:
No
Supports:
Yes
Resolution:
0.12mm
Infill:
30%-100%
Filament brand:
ESun
Filament color:
White
Filament material:
PLA
Notes:
Supports are only really needed if you want to make the countersink for the screws nice and neat. Not technically necessary, but handy. I would stick to layers 0.16mm or less to ensure the lip that holds the lid up doesn't print incorrectly.

Tags

433 433mhz cc1101 CC1101 case flipper flipperzero flipper zero Flipper Zero Case

Flipper Zero Rabbit Labs CC1101 433MHz 外壳

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

3D打印 Hawkeye Thumb 2摄像头模型
2024-03-21
TBS源一V5 Matek M10Q 5883 Vifly GPS伴侣SMA安装座
2024-04-11
巨魔头像 01
2024-04-21
联想 ix4-300d NAS硬盘架 3D模型
2024-05-04
娜奥米·吴设计的胸罩3D模型
2024-05-04

最热下载

Valorant 杰特的姿态
2023-03-26
安益卡通 i3 迷你 HGX 轻量挤出器
2024-04-21
Neptune 4 / 4 Pro Cura 切片配置文件与使用教程
2024-05-02
螺旋锥形手玩具（全新）
2024-05-08
巴黎卢浮宫的三圣母像
2025-07-16

最新模型