参数化图形支撑架

Parametric Figure Riser/Stand

2024-04-12 12:16:27

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a simple parametric figure riser/stand I designed in OpenSCAD. It's designed for and works best with figures with round bases (generally anime figures, minis, etc). Default settings should work well for most 1/8-1/4 scale figures, just change the Rise and Base Diameter to your needs!

This is my first from-scratch OpenSCAD project, so hopefully everything works alright! Let me know if you have any issues. ( ´ ▽ ` )ﾉ

Parameters (all in mm):

-Rise - height that you want to raise the figure
-Base Dia - diameter of the figure's base to the outside edge. 1mm is added to this measurement to ensure good fit
-Lip Height - height of the edge that covers side of the figure's base to stabilize
-Lip Thickness - thickness of ^
-Rest Thickness - thickness of inner ridge that figure sits on
-Brace Thickness - thickness of the x brace at the bottom of the riser
-Edge Reduction - determines how big the gaps are between edge pieces. (The riser's width is divided by this number, and a chunk equal to that width is removed from each side.)