海王4/pro风扇模组层移版

Neptune 4/pro Fanmod by layer.shifted

2024-04-12 17:17:00

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This fan-mod targets to provide better cooling then stock while sticking loosly to the stock design language while integrating 2x 5015 Fans and 1x4015 Fan. There is a PDF with assembly instructions. It also tells about the different variants you could go for.

This was testprinted several times on an Neptune 4(non Pro). It has to be said that you have to have your Printer and Filament dialed in very well as the tolerances of some of the Parts are fairly tight. This was necessary to get a decent rigidity despite the relatively low weight.

It was designed to fit Sunon 5015 Fans as well as gdsTime and Elegoo 4015 Fans.
If you stick to the Elegoo Fan Version you will not require any additional screw. The are reused from stock ones. The only thing additionally required will be jst 1.5. connectors for the Sunon fans and switching of pins on the 4015 Fan as this is reversed on the Extruder Board.

*.3mf: Sliced with Orca 1.9.1 for Neptune 4 with PLA
Other Slicers: Take settings from PDF