P15障碍物模型

P15 baffle

2024-04-12 17:45:49

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I did not much like the original baffles on my P15 so I designed my own.
These are a little bit taller than the stock ones so you probably only want 7 of them and move the shroud holder some 4mm forward. If you insist in having 8 of them you will need to move the shroud holder some 16mm forward.
The STL shared is designed for .22 (5.5mm) pellets. It will be ok also for .177 but might clip for .25. If you own a .25 version you may want to make the hole a little bigger.
Physically the hole should be around 7mm and is big enough for the 6.35mm pellet to pass trough but the bore of your barrel is not necessarily perfectly concentric with the shroud and you may get clipping or big POI drift.