4x4国际象棋棋盘盖

4x4 Chess set toppers

2024-04-13 02:14:05

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a set to make a full outdoor giant chess set using a printer and 4x4 posts. Simply print out a base and a topper, slide the base over the topper and onto a 4x4 and screw in with any 82 degree wood screw of your choice. The only part requiring supports in the Knight. Removing them takes a bit of patience. I found the best method is to start where the supports connect to the bottom of the piece and to snip that connection and the support comes right out. For reference a full plastic model for a big chess set can cost about 800 dollars. Making this is about 100$ worth of printer material (PLA) and about 150$ worth of wood. So you could even buy a 500$ printer and make these pieces and still end up saving money and come out on the other end with a printer... just saying

Print Settings

Printer:
Ender 3 V2
Rafts:
No
Supports:
No
Resolution:
Any
Infill:
20%
Filament brand:
Any
Filament color:
White and Black
Filament material:
PLA/ ABS
Notes:
Again, the only piece that needs supports is the knight. The bases print just fine so long as you print them upside down. No need for supports for the holes.