参考示例：Game Boy Advance关节的替换使用

Reference example use of replacement gameboy advance hinge

2024-04-13 07:07:38

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I'm posting this up just as a reference for anyone who wants to use a gamboy advance sp hinge in their design. The remarkable Penketsu cyberdeck used this hinge and I've wanted to try it since I saw that.

It's a very small part and you'll no doubt need to tweak the dimensions of your model to work well with your particular printer. Hopefully the sketches/photos attached here help.

The hinge is designed to slide into one end of the two printed parts.
I used a 6.3mm barrel for a snug fit.
There are two shoulders inside the barrel that keep the hinge from rotating inside of it. The shape of the shoulders are a little different on each of the printed parts.
on the first half of the printed part, the shoulders need to be 4.5mm tall and the hinge will slide through them until poking out the other side and butting up against the shoulder.
on the receiving part, the hinge pushes in past the shoulders and there is a ring 3mm deep, and 1mm thick, that the hinge snaps into.

It took me three or four tries to get it to fit well, but once snug, the hinge has very nice feel with resistance and snapping into the "closed" position.

I recommend printing with .1mm layer height so the snap ring prints well. I made these with a .6mm nozzle, so .4 should be even better.

This is the part I've tested with: https://www.amazon.com/gp/product/B00YCEOXIK/