2x5.25英寸转6x2.5英寸硬盘支架

2x5.25" bay to 6x2.5" hard drive enclosure

2024-04-13 11:39:56

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a drive enclosure for the HP Z4 G4 I made, but it should work in any 2x5.25" pair of bays. Each tray is meant to house a 2.5" server height drive, but can also carry regular height laptop 2.5" drives. I also included a crude mount for a 120mm fan to help cool the drives.

The real life photo on this post is from a previous revision of this project, but all I did was just shorten the drive bay and add a fancy handle to the new model.

Print Settings

Printer brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
No
Filament brand:
Creality
Filament material:
PLA
Notes:
I would recommend using a brim on the drive sled/tray print, but otherwise you should not need supports for any of the parts.