魔幻哈利波特魔杖：适用于Seeeduino Xiao（Arduino）和RGB LED

Magic Harry Potter Wand for Seeeduino Xiao (arduino) and RGB LED

2024-04-13 13:22:03

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Welcome witches and wizards!

I've been working a long time now on wands that have an arduino and motion sensor inside (acceleration sensor) which can be used to control other thing or to use like a remote. Other ones i found only always where very bulky, my goal was it to built this really thin and elegant.

Here is how I built it:

I started this one simple with just

an seeeduino xiao sense BLE
a small lipo battery that can directly be attached to the xiao
an rgb led with standard resistors
micro switch

Controlling the 3 colors of a rgb LED with the 3 axes of motion of a motion sensor is something that has always been on my mind and is really easy to realize, so I made this first.

This is a perfect base for future projects, since the xiao sense BLE also has built in bluetooth to communicate with other things or the RGB LED could be replaced by an IR LED to use as a IR remote and so forth.

So if you wand to develop this further, please comment here or on my video to let me know what you did and please always quote me in your description if you publish something.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 S1
Rafts:
Yes
Supports:
Yes
Notes:
Print the shaft standing upright with a brim without supports.

Tha handle parts I printed laying flat with the opening facing upwards with supports. This was my best experience to have the inside for the electronic parts printed nicely.