马伊斯托沙漠兽前轮模型
Maisto Baja Beast Front Wheel
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I drove over my kid's RC car and broke a front wheel. Designed this one on Fusion 360 and it seems to fit pretty well. It's not an exact replica, but good enough.
The tire came off the old wheel and fit here pretty well.
All files included so you should be able to change anything in Fusion 360.
Watch the 4 lips/ridges when putting the tire on. One of mine split a little - not sure if it was a mis-calibrated printer or maybe the design needs a fillet or better design where the ridges meet the barrel of the wheel.
I wanted to make the wheel pretty tough, thus the wide ribs in the spokes. You could probably get by with less material there.
This is my first wheel design, so if it's whacky, that's why.
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3 Pro
- Rafts:Doesn't Matter
- Supports:Yes
- Resolution:.2
- Infill:30%
- Filament brand:
Doesn't matter
- Filament material:
PLA+
- Notes:
The original wheel is a bright orange.
Tags
相关内容
联系我们
热门推荐
-
3D打印的F450型号四旋翼无人机2023-03-27 -
梅赛德斯G级越野车钥匙扣2024-03-17 -
兽人头盔——奇幻风格2024-04-23 -
以色列国防军2024-05-03 -
桌面锯机倾角与高度手摇轮（½英寸轴）2024-05-04
最热下载
-
车身RC 1/10 全套2023-03-26 -
尼克公司仿生假手指V3.5.5版2023-03-26 -
Neptune 4 / 4 Pro Cura 切片配置文件与使用教程2024-05-02 -
厨房水槽滤网过滤器2025-06-05 -
巴黎卢浮宫的三圣母像2025-07-16
最新模型
-
适用于Raspberry Pi5的多功能适配器外壳2025-07-27 -
HGX lite v2支架2025-07-18 -
真实玩偶 / 镶有凸圆形玻璃参数的眼睛2025-07-15 -
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24
