BlueSCSI v2 SPARCstation驱动器支架及密封环

BlueSCSI v2 SPARCstation drive bracket and grommets

2024-04-14 01:46:08

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This bracket allows you to mount a BlueSCSI v2 Desktop 50 pin 2023.10a in a Sun SPARCstation 10. I don't know what other Sun machines use the same type of drive mount.

I'm not sure which versions of BlueSCSI v2 this bracket is compatible with. It definitely works with 2023.10a, which is what I have. I noticed that the screw hole locations differ between at least 2023.09a and 2023.10a. I find that the board snaps into the bracket fairly securely without even needing to be screwed down, though.

I printed the grommets using TPU since they need some flex to slide into place and to provide the friction that holds it in place. The original Sun drive grommets seem to be made of a soft plastic or rubber, so I figured TPU was a good substitute.

Screws I used: