苹果SE系列PDS接口模块（BlueSCSI V2，50针，桌面）

Macintosh SE PDS mount for BlueSCSI V2 (50 pin, Desktop)

2024-03-30 06:46:52

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a modification of the stock BlueSCSI bracket to allow mounting in the Macintosh SE's case at the PDS slot with two 800K floppy drives installed.

In Prusa, paint supports in the large opening to ensure proper printing.

Depending on your IDC cable you may or may not have to modify this model for proper spacing out of the back of the case. You will almost certainly have to fold your IDC cable, so be careful!

The PDS cover will no longer fit with the BlueSCSI mounted in this location. If you wanted to fit it back on you'd need a very slim IDC cable and I don't know if those exist.
I may design a cover that will let the BlueSCSI poke out of the back of the case but still be slightly protected.

I also left a small cutout to fit a spudger under in case you print this in ABS, like I did, and use glue to affix your parts to the bed.