里科的枪（来自《Brawl Stars》）

Rico's gun from Brawl Stars

2024-04-14 01:46:08

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Hello everybody!

I made Rico’s gun from brawl stars!

Although there is a full body if you need the full model, the gun It’s made of 10 different parts (HANDLE, TRIGGER, BODY, BARREL, BARREL2, JOINT, CABDOWN, CABLE, CABUP, MAGVASE)MAGNOVASE) and the marbles in the magazine (which, naturally, you may skip printing if you already have some at home).

You will also need some glue and the transparent filament for the magazine but it's not necessary.

BUILDING INSTRUCTION:

Print all the parts, as you can see there are 2 magazines (MAGVASE and MAGNOVASE) that’s because you can print the MAG VASE using tha vase-mode on cura slicer in order to get the thinnest walls possible or else you can print the MAG NOVASE which has already 2mm walls in it. The choice is yours!
P.S. you have to rotate the parts in order to get the best print quality.
Once you have all the components printed, glue the trigger inside the handle in the right hole (there is only one, you can’t miss it :) ),
Glue the handle to the main body,
Slide the joint with some glue inside the right place in the main body,
Slide the barrel2 in the glued joint with some glue,
Put some glue on the barrel and stick it to the joint.
Insert the CABDOWN in the right place inside the main body with some glue,
Glue the CABLE to the CABDOWN
You have to put the marbles inside the MAGAZINE (MAGVASE/NOMAGVASE) and stick it to the CABUP
Glue the CABUP to the CABLE.

Well done! Now you have Rico's gun.