Connect-a-Beam建构套装

Connect-a-Beam construction set

2024-04-14 03:55:14

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Connect-a-Beam is a construction set that was designed to be easily 3d printed and assembled quickly. That means that it's reasonable large to print it with for example 0.6 mm nozzle and with no supports and you can snap parts together with connectors.

Advantages

printable without supports
printable with PLA
printable with 0.6 nozzle (faster and does not have to be that precise)
big parts (at least most of them)
quick & easy assembly, just click parts together with connectors
extendable
customizable
open-source

Notes

Connectors - there are fixed and movable connectors. If the normal movable connector is not moving freely, try to print connector_looser.stl, it is a bit smaller.
Gears - the small gear is a bit loose because I had a problem to get it right, but should work. I'm planning to release scad file with gear generator in foreseeable future.

Github

https://www.youtube.com/watch?v=3soiScfYROg

Print Settings

Printer brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.6
Infill:
not required
Filament brand:
Doesn't matter
Filament material:
PLA
Notes:
Connect-a-Beam construction set is made to be printed easily from PLA with no supports and does not have to be too precise (0.6 nozzle is fine).