螺纹式药瓶盖

Screwable Pill Capsule (waterproof container)

2024-04-15 03:32:12

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A pill shaped screwable container. Use it to store pills or other things waterproof. (If you use it for pills it's called a Pill Pill Capsule...)

To be completely waterproof, an O-ring must be added. Inner diameter should be Ø14-Ø18.5mm. Thickness 2-3.5mm.

There is also a version for use without O-ring. The watertightness there is achieved by a conical seal.

The thread used does not require any post-processing, is very smooth to use and exceptionally strong. It requires a few screws in and out to smooth out the roughness of printing. Even when scaling up the model (where the space between the inner and outer thread increases), the thread will continue to function properly.

There are 2 versions for the upper part (O-ring version): 1 for attachment to a steel ring (see photo) and 1 for use with a lanyard. The latter has no visible eye for attachment to the Pill...

Printing

Print both parts with the rounded side facing up. I printed everything with 0.4 nozzle, 0.2 layer thickness and 100% infill.

For the part with external thread, use paint on support for the contact surface of the O-ring. Avoid internal support! Also use a (outher)brim for this part for good adhesion to the print bed!

The part with internal thread can be printed without support and brim.

For the [no o-ring] version both parts can be printed without support. Use a brim for the top part!