3D打印笔夹

3d printer pen holder

2024-04-15 13:33:06

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

3d printer holder can convert the your 3d printer to use as plotter.

Print Settings

Printer brand:
Kingroon
Printer:
Kingroon KP3
Rafts:
No
Supports:
No
Resolution:
0.4
Infill:
20
Filament brand:
Maker
Filament color:
red
Filament material:
PLA
Notes:
3d printer holder can convert the your 3d printer to use as plotter.the Materil used 10 gram with 1 hour and can install it for any printer, and tested on on 3d Kingroon printer

The holder can slide up and down as well as tilt. Wheels should move freely.

Printed on a kingroon.

No supports needed (they are built into the model)

Finished model is pretty small - about 2 meter in height.

I've included files in multiple parts for each color as well as a single color version.

Please note fitment may be different for different printers. Everything should snap in place, aside from the cabin which may need to be glued since the pillars are thin.

Some tests show the holder may be loose depending on your first layer Z height because of elephants feet. Adjusting that may help with proper fitment.

I'm always open to any suggestions for changes/improvements. If you have any, please leave them in the comments.

Happy printing!

Tags

3d printer holder pen plotter

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

Huion Kamvas 24 Plus 配件支架
2023-04-04
GPD Win 2 高性能3D工作站
2023-04-30
面板视图19英寸立架模型
2024-03-14
300毫升Marinelli型号试管，适用于Radex Obsidian
2024-04-04
3D模型: Lula
2024-04-07

最热下载

最新模型