瑞昱 RPA 模块

Rexime RPA mods

2024-04-15 17:39:12

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Lightened parts and rear sights for the Reximex RPA or MITO, in the target shooting pistol version.
Parts are printed in PLA with 100% infill and supports (all possible). The barrel cover does NOT have a thread for the moderator.

All this makes the rear sight better, I used those from an old disused Diana rifle. The front sight was taken from a project found here on thingverse and modified with the addition of the LPA.

Print Settings

Printer brand:
Artillery
Printer:
Artillery Sidewinder X1
Rafts:
No
Supports:
Yes
Resolution:
dinamyc
Infill:
100%
Filament brand:
SunLu
Filament color:
Black
Filament material:
PLA

Post-Printing

For an optimal result, the pieces must be carefully sanded with 500 fine water-based paper. The inside of the barrel cover was sanded with an aluminum bar on which a piece of 500 sandpaper was glued. The painting can be done as desired, I chose satin black.
For the rear sight, M2 screws with the relevant nut would be better, while to fix the rear sight you need to place the grip on the hilt and then drill a self-tapping screw to secure everything.

瑞昱 RPA 模块

朋友，你觉得上面这个模型，属于下面的哪个分类？