轻木板支撑件优化设计

Feather board runners reduced design

2024-04-15 18:07:53

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I bought a pair of feather boards for my Power Devil hobby/DIY Power Devil table saw.

the feather boards had no dimensions listed at all.. I presumed the tracks they fit in were standard.. well, they're not. the image with this type of board on (not mine but similar) shows the track that the plastic runners fit it..
the supplied runners were not only wider (18.5mm) than my track (15.6mm) but deeper too at 9mm.. my track depth is only 6.3mm

I wanted to keep the kit of stuff but just needed smaller runners. this is a modification of the supplied black ones. and the special wedge bolts still fit perfectly.

Print Settings

Printer brand:
Creality
Printer:
Ender 5
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.2mm
Infill:
100 %
Filament brand:
generic
Filament color:
any colour you have
Filament material:
PLA
Notes:
no supports needed if printed as it comes

How I Designed This

used Tinkercad

轻木板支撑件优化设计

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

Gun4IR 光枪侧边按键改装模块｜3D打印机械开关支架
2023-05-23
宝马E60 E61猪鼻风扇通风衬垫
2023-08-03
皮卡丘游乐场行李牌
2024-03-15
1:16 Tog二代
2024-04-15
JeNo 3" 笼罩 DJI O3 + 支架 + 电池保护 + 40° 防撞器
2024-04-19

最热下载

最新模型