Frigidaire冰柜内货架金属支撑架

Frigidaire Freezer Wire Shelf Support Bracket

2024-04-16 08:35:53

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Bracket matches the included (albeit poor designed) freezer shelf brackets that were apparently manufactured for the freezer shelves front corners to keep them "mounted" on the freezer sides. Fitment is a bit tight so your grandma would have a tough time squeezing them onto the wire shelves. Note the white bracket in the photos is the original, while the black part is the 3D printed version.

Original Part Thoughts

My bet is that Frigidaire had some wire racks that were 1cm too narrow, so they had some intern "design" these brackets to clip onto the shelves to hold them up. They work as intended, but the fitment could be much better.

Freezer Model:
Electrolux Frigidaire
FFUE2022AW6 June 2022

Print Settings

Printer:
Monoprice Architect
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
Solid
Filament brand:
Any
Filament color:
White
Filament material:
PLA
Notes:
Print standing on the edge. No support needed as long as you have good bed adhesion.

How I Designed This

Trace + Scan + Fusion360

I traced the original part onto a sticky note, and included a 30mm reference line. Scanned the sticky note, import the scan into Fusion360 as a canvas, calibrated the canvas to the 30mm reference line, sketched the geometry and extruded.