适用于iPhone 14 Pro的正方体读卡器固定架（兼容Otterbox Defender保护壳）

Square Reader holder for iPhone 14 Pro with Otterbox Defender

2024-04-16 09:33:17

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

适用于iPhone 14 Pro的正方体读卡器固定架（兼容Otterbox Defender保护壳）

Summary

This model supports iPhone 14 Pro with Otterbox Defender + 2nd Gen Square Reader. The phone is held securely if you follow the printing instructions. The reader can be left in the holder to charge the battery.

Print Settings

Printer brand:
FlashForge
Printer:
Adventurer 3
Rafts:
No
Supports:
Doesn't Matter
Resolution:
.20
Infill:
4 walls, No infill.
Notes:
I printed this model with 4 walls and no infill. I did not use supports, but had to do a little finishing where there was bridging on the card slot opening. The phone fit was a little loose, so I squeezed the two sides together slightly with a clamp and applied some heat, and let it cool in the clamp. Inserting the phone spreads the sides apart and the phone is held securely.