Kaly42 键盘套

Kaly42 Keyboard Case

2024-04-16 13:38:09

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Kaly42 Keyboard Case

This is a case for the Kaly42. It's designed in two halves with holes added to install heat-set threaded inserts to screw the two halves together. I'm an amateur at 3D modeling, and this model certainly has flaws, but it was fun to design and works!

The biggest flaw is probably with the foot mounts. Without the foot mounts, the case lays flat as you would expect, but with the foot mounts installed, there is a wobble unless you add in M4 screws for the actual feet to make adjustments. In the included photo, I'm using some feet I borrowed from a Glove80, but you could use whatever. If you DO add the foot mounts, I just used super glue to semi-permanently attach them to the base of the keyboard.

Additional hardware:

The case is held together with several M2 screws and threaded inserts.

Item	Quantity	Required?	Usage Location
M2 Threaded Insert (M2x3x3.5mm)	12	✓	Top Plate
M2*8 screws	12	✓	Bottom Plate
M4 Threaded Insert (M4x6x6mm)	4	✕	Foot Mount
M4 screws (longer screw = bigger tilt)	4	✕	Foot Mount

Disclaimer

The top plates have a very small tolerance and barely fit down around the keyswitches. This was an oversight and I probably should've added another millimeter or so of clearance. So... yup....