CYC光子环状工具

CYC Photon Chainring Tool

2024-04-16 16:14:57

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I decided I didn't want to wait to receive a chainring tool from CYC to remove my chain ring simply to do a basic spring service on my bike. This worked perfectly for me, and was plenty strong. I used 30mm M4 screws, they'll self thread no problem (use a power driver, go slowly). You'll need 5-10mm of exposed thread, just run the screws back until the tool is seated against the face of the chainring retainer, then torque away!

My tool of preference for this was a standard BB Cup removal tool, plenty of ability to disperse the force, and many of us bike guys have them in our inventory already. I don't think a standard drive attachment would have been ideal here. Either way, worked well for me! Good luck!

I also built a removal tool to take off the inner bearing (inside the housing) retainer ring. I had some crud behind it that was annoying me, and I wanted to repack the bearing while I had everything apart. I'll link that here below:

Print Settings

Printer brand:
FlashForge
Printer:
Finder
Rafts:
No
Supports:
No
Resolution:
.20mm
Infill:
80% Plus
Filament brand:
doesn't matter
Filament color:
doesn't matter
Filament material:
PLA
Notes:
I printed this at 200 degrees C. I generally print a little warmer, but it warped on the first half of the print with as much infill as I required. A little lower worked better for me here.