ProBoat激流版调整平衡板

ProBoat Jetstream Trim Tab

2024-04-16 23:04:13

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I broke the original weak trim tabs from my Proboat Jetstream, so here is my hopefully stronger alternative.
You still need to craft some proper dimensioned aluminium or stainless L profile brackets, bolted trough the hull with some big washers inside to attach those printed Trimtabs, trim the glued hinge attachments flush, fill and relocate the drain hole. I drilled one on the left side under the rear rollbar pillar; opposite location as the cooling exit, above the waterline; no more risk to sink when you forget the plug, and its much easier to use.
Have fun, sailor!

Print Settings

Printer brand:
Creality
Printer:
CR-X
Rafts:
Doesn't Matter
Supports:
Yes
Infill:
100%
Filament brand:
Extrudr
Filament material:
PLA Nx2 or stronger
Notes:
To improve the fluid dynamics, orient the last layer lines parallel to the fins
Infill 100% with 2 wall lines