杰拉尔特与耶内弗（巫师）-铭刻版

Geralt and Yennefer (The Witcher) - Hueforge Print

2023-09-07 20:40:46

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Never Lost, Always Found.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Overture Black Matte Transmission Distance: 3
PLA+ Sunlu Grey Transmission Distance: 2
PLA META Sunlu Red Transmission Distance: 4
PLA Overture Cream Transmission Distance: 3
PLA Sunlu Beige Transmission Distance: 8
PLA+ Sunlu White Transmission Distance: 5

Swap Instructions:
Start with Black Matte
At layer #12 (1.04mm) swap to Grey
At layer #16 (1.36mm) swap to Red
At layer #17 (1.44mm) swap to Cream
At layer #18 (1.52mm) swap to Beige
At layer #24 (2mm) swap to White for the rest.

Your filament settings and mine may differ in TD, so best to adjust yours according to your known TD filaments.