光剑组件可拧上（无需螺丝）
Lightsaber screw on assembly (no screws required)
2024-04-17 04:26:57
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I just wanted to share the alterations I made to the hilt.
The Center piece can now be screwed into its counter parts.
This design provides more rigidity, along with quicker assembly and disassembly.
It's worth printing without supports to save time and filament; I printed the entire Lightsaber vertically without supports and everything works great.
The original lightsaber was designed by Adafruit.
You can go to https://www.adafruit.com.
for their Lightsaber kit.
Print Settings
- Rafts:No
- Supports:No
- Resolution:.2mm
- Infill:100%
- Filament brand:
Anycubic
- Filament color:
blue
- Filament material:
PLA
- Notes:
If you set your infill to 100% it will be easier to print.
A solid infill without supports made the entire Hilt approximately 129g of filament.
Tags
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
最新模型
-
宝峰 UV-9R Pro 体积保护罩2024-05-08 -
10件套钻石缝纫盒2024-05-08 -
迷你R50 DIY收音机2024-05-06 -
尼基塔钥匙扣模型2024-05-06 -
壁挂搁架挂钩2024-05-06
